Readers
The shapely, small and ergonomically designed housings fit best into any kind of building architecture.
XMP-MOBILE
The portable device XMP-MOBILE extends the functionality of XMP-BABYLON regarding Mobile Access Control.
Typical areas of application are Access Control, Time and Attendance, Barrier Control, Ticket Checking, Picture Comparison or Guard Round.
Features:
- Robust housing for use in outdoor environments, protection class IP65
- Communication with XMP-BABYLON via WLAN, GPRS/EDGE or mobile phone (SIM card)
- 256-bit Blowfish encryption
- Real-time authorisation check of a person in online mode or offline
- Antipassback function
- XMP-MOBILE can activate the outputs of XMP Door Controllers directly
- Up to 2048 XMP-MOBILE devices may be connected to one XMP-BABYLON system
- In WLAN mode all XMP-MOBILE devices are checked and supervised continuously
- Optional integrated RFID card reader and/or 1D/2D barcode scanner
- Optional integrated 2.0M pixels camera
- Optional integrated GPS module
Brand AUTEC
XMP-LRU-3×00
XMP-LRU-3000 for standard UHF applications with reading distances > 3 m, low/middle tag population (< 150)
XMP-LRU-3500 for operation in particularly disturbed and metallic environments, high tag population (> 150)
Features:
- Connection to door controller units XMP-K32, XMP-K32sx or XMP-K12
- Read range up to 12 m (XMP-LRU-3000) or up to 16 m (XMP-LRU-3500)
- Robust metal housing for use in industrial environments
- Dimensions 260 x 157 x 65 mm (10.24 x 6.18 x 2.56 inch)
- Protection class IP 53, optional IP 64 (with protection cap)
- Power supply 24V/DC (+/-5%) or Power Over Ethernet (only XMP-LRU-3500)
- Real-time Linux operating system
Brand AUTEC
XMP-TMC2230/2240 Hitag®/Miro
The Mullion Card Readers XMP-TMC2230 Hitag®/Miro and XMP-TMC2240 Hitag®/Miro are designed for use in Access Control.
XMP-TMC2230 Hitag®/Miro Reader for Access Control; connection via Door Controller XMP-K32, XMP-K32sx or XMP-K12 without pin code keyboard.
XMP-TMC2240 Hitag®/Miro Reader for Access Control; connection via Door Controller XMP-K32, XMP-K32sx or XMP-K12 with pin code keyboard.
Features:
- Reading distance from 30 to 100 mm
- Dimensions (HxLxW): 50 x 136 x 25 mm
- Encrypted data transmission activated by micro switch (SecuCrypt®)
- Firmware update via SecuCrypt® protocol
- Signaling elements: 3 LEDs, 1 buzzer
- Adjustable address via micro switch
- Integrated tamper switch
- Power supply from door controller
Brand AUTEC
XMP-TMC2250/2260 MIFARE®
The Mullion Card Readers XMP-TMC2250 MIFARE® and XMP-TMC2260 MIFARE® are designed for use in Access Control.
XMP-TMC2250 MIFARE® reader for Access Control; connection via Door Controller XMP-K32, XMP-K32sx or XMP-K12 without pin code keyboard.
XMP-TMC2260 MIFARE® Reader for Access Control; connection via Door Controller XMP-K32, XMP-K32sx or XMP-K12 with pin code keyboard.
Features:
- Reading distance: from 50 to 80 mm
- Dimensions (HxLxW): 50 x 136 x 25 mm
- Encrypted data transmission activated by micro switch (SecuCrypt®)
- Firmware update via SecuCrypt® protocol
- Signaling elements: 3 LEDs, 1 buzzer
- Adjustable address via micro switch
- Integrated tamper switch
- Power supply from door controller
Brand AUTEC
XMP-TMC2801-PV
XMP-TMC2801-PV Readers with palm vein authentication technology are particularly suitable for high security areas.
An individual’s identity can be verified by recognizing the pattern of blood veins in the palm with near-infrared rays. Since palm vein authentication is contactless and non-invasive, Palm Vein Readers ensure a high level of user acceptance even in hygienically sensitive areas such as hospitals.
The following card variants are available:
- XMP-TMC2801-PV-HIT (Hitag®)
- XMP-TMC2801-PV-MIF (MIFARE®)
- XMP-TMC2801-PV-LEG (LEGIC®)
Brand AUTEC
XMP-TMC280x-FP
The XMP-TMC280x terminal has been specially designed for the Biometric Access Control. This terminal is equipped with a 2×20 digits fluorescent display, 9 special keys with 5 function keys and a numeric keyboard as well as an optical sensor for fingerprint. High flexibility enables a wide application spectrum in many areas of electronic security and automation systems.
The variants XMP-TMC2802-FP and XMP-TMC2801-FP are available as well.
For security reasons all templates (fingerprints) are stored in the XMP-K32 (host) in the secured area. After a request, for example after an identification booking or after input of a personal pin code, the current fingerscan will be send coded to the door control unit and will be compared with the current fingerprint.
Brand AUTEC
XMP-TMC2803
Card Readers of series XMP-280x have been designed for a broad spectrum of applications, including Access Control and Time Recording in high security areas.
XMP-TMC2803 has no digital inputs and outputs. It must be connected to one of the Door Controllers XMP-K32, XMP-K32sx or XMP-K12.
Technical details:
- Protocol encryption via micro switch (SecuCrypt®)
- Firmware update via SecuCrypt® protocol
- Status display for communication (3 LEDs)
- Integrated terminal resistor, activated on demand for data transmission
- Adjustable address via micro switch
- Fluorescence display 2×20 digits
- Numeric keypad
- Integrated tamper switch
- Vandal proof housing
- Proximity card variants: MIFARE®, LEGIC®, Hitag®
Brand AUTEC
XMP-TMC2801
Card Readers of series XMP-280x have been designed for a broad spectrum of applications, including Access Control and Time Recording in high security areas.
XMP-TMC2802 has no digital inputs and outputs. It must be connected to one of the Door Controllers XMP-K32, XMP-K32sx or XMP-K12.
Technical details:
- Protocol encryption via micro switch (SecuCrypt®)
- Firmware update via SecuCrypt® protocol
- Status display for communication (3 LEDs)
- Integrated terminal resistor, activated on demand for data transmission
- Adjustable address via micro switch
- Numeric keypad
- Integrated tamper switch
- Vandal proof housing
- Proximity card variants: MIFARE®, LEGIC®, Hitag®
Brand AUTEC
XMP-TMC2801
Card Readers of series XMP-280x have been designed for a broad spectrum of applications, including Access Control and Time Recording in high security areas.
XMP-TMC2801 has no digital inputs and outputs. It must be connected to one of the Door Controllers XMP-K32, XMP-K32sx or XMP-K12
Technical details:
- Protocol encryption via micro switch (SecuCrypt®)
- Firmware update via SecuCrypt® protocol
- Status display for communication (3 LEDs)
- Integrated terminal resistor, activated on demand for data transmission
- Adjustable address via micro switch
- Integrated tamper switch
- Vandal proof housing
- Proximity card variants: MIFARE®, LEGIC®, Hitag®
Brand AUTEC
XMP-TMC2390/2395 HID® iCLASS®
RFID Card Readers XMP-TMC2390 HID® iCLASS® and XMP-TMC2395 HID® iCLASS® are designed for use in Access Control, Door Management, Parking System, Elevator Control etc..
XMP-TMC2390 HID® iCLASS® without keypad.
XMP-TMC2395 HID® iCLASS® with sensor keypad for PIN code input.
HID® card data format H10301 (standard 26-bit format) is supported as well as HID® format Corporate 1000 (35-bit format).
Features:
- Reading distance up to 80 mm
- Dimensions (HxLxW): 90 x 90 x 21 mm
- Encrypted data transmission activated by micro switch (SecuCrypt®)
- Firmware update via SecuCrypt® protocol
- 256-bit Blowfish or AES encrypted transmission of data
- Signaling elements: 3 LEDs, 1 buzzer
- Adjustable address via micro switch
- Integrated tamper switch
- Power supply from door controller
Brand AUTEC
XMP-TMC2370/2380 LEGIC®
RFID Card Readers XMP-TMC2370 LEGIC® and XMP-TMC2380 LEGIC® are designed for use in Access Control, Door Management, Parking System, Elevator Control etc..
XMP-TMC2370 LEGIC® without keypad.
XMP-TMC2380 LEGIC® with sensor keypad for PIN code input.
LEGIC® prime / LEGIC® advant are supported.
Features:
- Reading distance up to 80 mm
- Dimensions (HxLxW): 90 x 90 x 21 mm
- Encrypted data transmission activated by micro switch (SecuCrypt®)
- Firmware update via SecuCrypt® protocol
- 256-bit Blowfish or AES encrypted transmission of data
- Signaling elements: 3 LEDs, 1 buzzer
- Adjustable address via micro switch
- Integrated tamper switch
- Power supply from door controller
Brand AUTEC
XMP-TMC2350/2360 MIFARE® DESFire®
RFID Card Readers XMP-TMC2350 MIFARE DESFire® and XMP-TMC2360 MIFARE DESFire® are designed for use in Access Control, Door Management, Parking System, Elevator Control etc..
XMP-TMC2350 MIFARE DESFire® without keypad.
XMP-TMC2360 MIFARE DESFire® with sensor keypad for PIN code input.
MIFARE® Classic cards are supported as well.
Features:
- Reading distance up to 60 mm
- Dimensions (HxLxW): 90 x 90 x 21 mm
- Encrypted data transmission activated by micro switch (SecuCrypt®)
- Firmware update via SecuCrypt® protocol
- 256-bit Blowfish or AES encrypted transmission of data
- Signaling elements: 3 LEDs, 1 buzzer
- Adjustable address via micro switch
- Integrated tamper switch
- Power supply from door controller
Brand AUTEC
CX6930
The security relay module (SRM) supplements the CX6130 wall reader with “remote actuation”. That means that the IT entry and analysis take place in a separate location from where the authorization is issued. The wall reader is connected to the security relay module, which is installed in the secure interior, via a two-pin bus connection. The users enter the data by swiping their transponder cards at the wall reader, the SRM issues the release to the corresponding door upon authorization.
There are two available relays per security relay module. The design with one relay is standard.
By separating the entry of access date and the subsequent authorized release, the problem of manipulation from the exterior is solved and thus unauthorized access is eliminated.
Brand Uhlmann & Zacher
CX6910
The remote module is an extension of the wall mounted reader by a “remote actoric unit”. That means that the reading of the key and the actual locking/unlocking take place at different locations; in the case of a wall mounted reader that means the switching of a relay.
The key is e.g. read by the wall mounted reader on the outside, the engagement of the door buzzer takes place on the secured inside by the remote module.
The number of relays required per remote module may vary considerably depending on the application. For this reason, the remote module itself has a modular design. For this purpose, it comprises a control unit (“master remote module”) that is connected to the wall mounted reader and several subunits (“slave remote modules”) serving to increase the number of relays of the whole remote module.
Per remote module, 8 relay slots are available. Up to 16 remote modules can be connected; that means that a total of 128 relays can be operated via a wall mounted reader.
The housing is suitable for DIN rail mounting.
Brand Uhlmann & Zacher
CX6132
With the Clex wall mounted reader, potential-free contacts (e.g. for electric door openers, electric locks, electric door and gate drives, elevators) are switched by means of a key shown without contact (passive transponder), by actuating an active transponder or with online devices, by pushing a button in the Keyvi3 software.
The whole electronic system incl. switching power supply, key reader unit, analysis, control unit and switching relay is located on a compact unit that can be mounted in a simple flush-mounted box. Can be used as security version in connection with the security relay module (SRM) CX6930.
By means of different covers and housings (Gira S-Color, Gira TX-44, surface- mounted, flush-mounted), manifold installation possibilities can be realized.
Available as a version with up to 128 virtualizations. Up to 128 relays, via one to 16 remote modules, can be authorized as individual units. E.g. for post office box systems or elevator controls. (This version can only be operated offline and in combination with access right on the key.)
The wall mounted reader is available as flush-mounted and surface-mounted versions for the inside and the outside.
Brand Uhlmann & Zacher
XMP-TMC2330/2340 Hitag® / Miro
RFID Card Readers XMP-TMC2330 Hitag® / Miro and XMP-TMC2340 Hitag® / Miro are designed for use in Access Control, Door Management, Parking System, Elevator Control etc..
XMP-TMC2330 Hitag® / Miro without keypad.
XMP-TMC2340 Hitag® / Miro with sensor keypad for PIN code input.
Hitag-1® and Hitag-2® are supported.
Features:
- Reading distance up to 100 mm
- Dimensions (HxLxW): 90 x 90 x 21 mm
- Encrypted data transmission activated by micro switch (SecuCrypt®)
- Firmware update via SecuCrypt® protocol
- 256-bit Blowfish or AES encrypted transmission of data
- Signaling elements: 3 LEDs, 1 buzzer
- Adjustable address via micro switch
- Integrated tamper switch
- Power supply from door controller
Brand AUTEC
CX6130
With the CX6130 wall reader, potential-free contacts (e. g. for electric door openers, electronic locks, electric doors and door motors, lifts) are activated through a (contactless) key (passive transponder) held in front of it.
All the electronics including switching power supply, key reader unit, evaluation, control unit and switching relay are located in one compact unit which can be mounted in one single flush or surface mounted box. A multitude of installation options can be realised through different blends and housings (Gira S-Color, Gira TX-44).
The CX6130 is available in a “virtual” version. Up to 128 relays, via one to 16 remote modules, must be authorised as individual units. For example for post box vestibules or lift controls.
Security version: the relay is separated in the protected inside area with its own switch unit. The wall reader is installed outside without a relay. The connection from the outside to the inside is cryptographically secured.
Transponder types: LEGIC®, active transponder (868 MHz)
Brand Uhlmann & Zacher
XMP-TMC3500
XMP-TMC3500 is a powerful high end Card Reader for Access Control, Time Recording and Time Accounting
Features:
- Support for RFID technologies Hitag® 1+2, MIFARE® Classic, MIFARE® DESFire®, LEGIC® prime, LEGIC® advant, HID iClass®
- Offline support for up to 250.000 badges
- Graphical 3.5″ display with impact protected glass
- Free definable sensor keys
- Integrated 10/100 MBit Ethernet interface
- 256 Bit Blowfish or AES encrypted transmission of data
- Direct communication to other terminals and door control units
- Power supply via Power over Ethernet (PoE) or internal power supply
- 64 time schedules
- 64 routines (small user programs)
- 16 graphical ViPS programs
- Event driven picture recording from max. 2 IP cameras
- Interface for an additional card reader
- Interface for additional I/O modules
- Real-time Linux operating system
Brand AUTEC