iDor security solutions, complete access control systems

Lock Cylinder

CX6142

CX6142

The CX6142 consists of an electronic and coupling unit which is located inside and an antenna located in the outer knob. The CX6142 has an electronic authorisation on both sides and is already set up for 868 MHz wireless networking as standard.

The communication electronics, mechatronics and batteries are located in the knob module on the protected inner side. In the small outer knob there is just an antenna, however no energy supply or coupling mechanism at all.

The security version has special withdrawal and drilling protection mechanisms in the cylinder and outer knob. Thus the CX6142 is particularly suitable for use in exterior building doors or other doors which required a high level of mechanical protection against break-in.

Thanks to the installation of the Clex knob module using a Euro profile cylinder, conventional DIN Euro profile locks can be used and practically no extensive assembly is required. Thus the double-knob cylinder is a cost-effective solution for both new and existing buildings.

The locking cylinder is powered with two conventional CR-2 lithium batteries which can power up to 40.000 locking operations. The battery management issues 3 tones before the last closing operations to indicate that the battery needs to be changed. Using a low power adapter and servicing device, a secure opening is possible from outside even when the battery is completely flat.

The broadest range of transponder carriers can be used in the Clex knob module as keys. These include as a passive transponder (without power supply): ISO card CX6320, fob CX6330 or the transponder clip CX6340 and alternatively CX6362 as an active function transponder.

Brand Uhlmann & Zacher

CX6182

CX6182

The CX6182 is used as profile cylinder with electronic freely rotatable knob on both sides. Release is brought about on both sides by electronic authorization. The evaluation electronic system and the mechatronics are integrated in the electronic knob together with the batteries on the protected inside. Only the reader electronics including an antenna with optical and acoustic signals is present in the smaller outer knob, but there is no power supply or coupling mechanism.

By means of the assembly of the CX6182 by means of a Euro profile cylinder, conventional locks for DIN Euro profiles can be used and complicated assembly is not required. This means that the double-knob cylinder is a favorably priced solution for both, new buildings and existing objects.

As key, most different transponder bearers can be used at the CX6182. These include for example: ISO card, key fob, key of the Clex cylinder.

Brand Uhlmann & Zacher

CX6140

CX6140

The CX6140 consists of an electronic and coupling unit which is located inside and an antenna located in the outer knob. The CX6140 has an electronic authorization on both sides and is already set up for 868 MHz wireless networking as standard.

The communication electronics, mechatronics and batteries are located in the knob module on the protected inner side. In the small outer knob there is just an antenna, however no energy supply or coupling mechanism at all.

Thanks to the installation of the Clex knob module using a Euro profile cylinder, conventional DIN Euro profile locks can be used and practically no extensive assembly is required. Thus the double knob cylinder is a cost-effective solution for both new and existing buildings.

The CX6140 is especially suitable for tubular framed doors because it has a small knob (30 x 30 mm) on one side, which provides enough room to open the door even with small framed door backsets. The cylinder has a both one-sided and two-sided authorization, therefore the small knob can always be used on the side of the framed door which is not suitable for large knobs. The CX6140 is also suitable for exterior doors of buildings as there is only an antenna located in the small knob. Because of the two-sided electronic authorization, the inner knob spins (use on SVP locks).

The locking cylinder is powered with two conventional CR-2 lithium batteries which can power up to 40.000 locking operations. The battery management issues 3 tones before the last closing operations to indicate that the battery needs to be changed. Using a low power adapter and servicing device, a secure opening is possible from outside even when the battery is completely flat.

The broadest range of transponder carriers can be used with the Clex knob module as keys. These include as passive transponders (without power supply): ISO card CX6320, fob CX6330 or the transponder clip CX6340 and alternatively CX6362 as an active radio transponder.

Brand Uhlmann & Zacher

CX6126

CX6126

The CX6126 consists of the universally applicable Clex knob module in a half cylinder CX6711.

The Clex knob module is a universally applicable, battery-powered unit which, for example, is also utilised in the cylinders CX6122 and CX6124 and is already set up for 868 MHz wireless networking as standard.

The communication technology, mechatronics and batteries are located in each knob module.

Thanks to the installation of the Clex knob module using a Euro profile cylinder, conventional DIN Euro profile locks can be used and practically no extensive assembly is required. Thus the double knob cylinder is a cost-effective solution for both new and existing buildings.

Each knob module is powered by two conventional CR-2 lithium batteries which can power up to 71.000 locking operations (depending on the transponder technology used). The battery management issues 3 tones before the last closing operations to indicate that the battery needs to be changed. The locking cylinder can always be powered from an exterior supply using a low power adapter, even with completely flat batteries.

The broadest range of transponder carriers can be used with the Clex knob module as keys. These include as passive transponders (without power supply): ISO card CX6320, fob CX6330 or the transponder clip CX6340 and alternatively CX6362 as an active radio transponder.

Brand Uhlmann & Zacher

CX6124

CX6124

The CX6124 consists of two free-turning Clex knob modules in one profile cylinder. Both sides must be electronically authorized separately.

The Clex knob module is a universally applicable, battery-powered unit which, for example, is also utilized in the cylinders CX6122 and CX6126 and is already set up for 868 MHz wireless networking as standard.

The communication technology, mechatronics and batteries are located in each knob module.

Thanks to the installation of the Clex knob module using a Euro profile cylinder, conventional DIN Euro profile locks can be used and practically no extensive assembly is required. Thus the double knob cylinder is a cost-effective solution for both new and existing buildings.

Each knob module is powered by two conventional CR-2 lithium batteries which can power up to 71.000 locking operations (depending on the transponder technology used). The battery management issues 3 tones before the last closing operations to indicate that the battery needs to be changed. The locking cylinder can always be powered from an exterior supply using a low power adapter, even with completely flat batteries.

The broadest range of transponder carriers can be used with the Clex knob module as keys. These include as passive transponders (without power supply): ISO card CX6320 or the transponder clip CX6340 and alternatively CX6362 as an active radio transponder.

Brand Uhlmann & Zacher

CX6122 AP

CX6122 AP

The CX6122 AP is a version of the CX6122, which has been developed for special use in existing emergency exits that only fulfill DIN with restraints.
Based on the CX6122, a double-knob cylinder was developed whose integrated mechanism ensures that after actuation the lock lug turns to the six o’clock position. The mechanical inner knob is has a fixed connection to the cylinder.

The Clex knob module is a universally applicable, battery-powered unit which, for example, is also utilized in the cylinders CX6124 and CX6126 and is already set up for 868 MHz wireless network as standard.

Thanks to the installation of the Clex knob module using a Euro profile cylinder, conventional DIN Euro profile locks can be used and practically no extensive assembly is required. Thus the double knob cylinder is a cost-effective solution for both new and existing buildings.

The communication technology, mechatronics and batteries are located in each knob module. The locking cylinder is powered with two conventional CR-2 lithium batteries which can power up to 71.000 locking operations (depending of the transponder technology used). The battery management issues 3 tones before the last closing operations to indicate that the battery needs to be changed. The cylinder can always be powered from an exterior power source using a low power adapter, even when the battery is completely flat.

The broadest range of transponder carriers can be used with the Clex knob module as keys. These include as passive transponders (without power supply): ISO card CX6320, fob CX6330 or the transponder clip CX6340 and alternatively CX6362 as an active function transponder.

Brand Uhlmann & Zacher

CX6122

CX6122

The CX6122 consists of the universally applicable Clex knob module which is combined with a profile cylinder with an electronic free-turning knob on one side and a fixed, mechanically connected rotary knob on the other.

The Clex knob module is a universally applicable, battery-powered unit which, for example, is also utilized in the cylinders CX6124 and CX6126 and is already set up for 868 MHz wireless network as standard.

The communication technology, mechatronics and batteries are located in each knob module.

Thanks to the installation of the Clex knob module using a Euro profile cylinder, conventional DIN Euro profile locks can be used and practically no extensive assembly is required. Thus the double knob cylinder is a cost-effective solution for both new and existing buildings.

The locking cylinder is powered with two conventional CR-2 lithium batteries which can power up to 71.000 locking operations (depending of the transponder technology used). The battery management issues 3 tones before the last closing operations to indicate that the battery needs to be changed. The cylinder can always be powered from an exterior power source using a low power adapter, even when the battery is completely flat.

The broadest range of transponder carriers can be used with the Clex knob module as keys. These include as passive transponders (without power supply): ISO card CX6320, fob CX6330 or the transponder clip CX6340 and alternatively CX6362 as an active function transponder.

Brand Uhlmann & Zacher